Exhaust gaskets - got them quite cheap from sparepart shop 1024x768 |
Remove the cover first for easier access to mounting nuts 1024x768 |
This is my new toy. 768x1024 |
OEM 4-1 manifold 1024x768 |
Extractor Cover removed, broke one bolt... 1024x768 |
Heavy Duty Wrench with extension pipe 1024x768 |
Mounting nuts are so tight! Loosen the nuts with 12mm heavy duty wrench. Drexchan in action... 1024x768 |
Mounting joint - 17mm & 14mm bolts 1024x768 |
Loosen bolts 1024x768 |
Me in action :P 1024x768 |
The famous deadman pose... :D 1024x768 |
Anaconda under the car?? 1024x768 |
Extractor lower mounting. Yeah.. that's my finger with gloves on it.. 1024x768 |
Loosen lower mounting bolt 1024x768 |
OEM vs WiSE extractor 768x1024 |
OEM vs WiSE extractor (close-up) 1024x768 |
OEM vs WiSE extractor (rear joint) 1024x768 |
Extractor removed clean the contact surface with scrapper 1024x768 |
Extractor removed clean the contact surface with scrapper 1024x768 |
Look at the oil leak... this is common for an old car.. 1024x768 |
Transfer the oxygen sensor to the WiSE Extractor 1024x768 |
At last, nicely installed into my car... woohoo!!! 1024x768 |
Two thumbs up by the installers!! 1024x768 |
Look at the gap between the extractor and the fan.. 1024x768 |
| | | |
