Thigns needed : 2 tonne jack, Hand drill, Drill Bit, driver bit and Painted lip.

Jack up the car high enough to access the lower part.

Attach both sides of lip 1st. My car is smilling :))

I used a M6 bolt temporarily to hold the lip

Drill the lip bottom part but not till the bumper

Screw in a long screw (2" big thread black screw)

I used 7 or 9 screws if not mistaken

Done.. no screws seen from outside

Put down the jack and check the workmanship

Old plastic screws were damaged. So i got new screws for it. RM2 a piece

New plastic screw in place